PITTSBURGH — Prior to the early 1920s, getting downtown from the South Hills was a tedious and circuitous route. The only bridges that crossed into the triangle were the Point Bridge and the Smithfield Street Bridge. The Smithfield Street Bridge also connected by trolley lines to the only tunnel, which was exclusively used for the trolleys.
With the automobile age approaching, the Pittsburgh Committee on City Planning hired Frederick Law Olmsted in 1901 to study ways to improve the traffic routes. His report included recommendations to build what would later become the Boulevard of the Allies and a bridge-and-tunnel to connect downtown and the South Hills directly.
Liberty Bridge Construction Frederick Law Olmsted's proposed plan for a "high" tunnel and steeper bridge combination that would have exited on the upper backside of Mt. Washington.
City planners took Olmsted’s recommendation that the route be prioritized as “eminently desirable,” but with significant changes. Olmsted’s plan would likely have been cheaper due to a shorter tunnel, but the bridge was thought to be too steep and high. In the end, it didn’t matter, because World War I put plans for the bridge on hold even as the tunnel boring moved forward.
Newly elected county commissioners took up completing the route with gusto and drafted bond measures to fund the construction, pointing out that the Liberty Tunnels alone were not being used to their full potential.
City Councilman P.J. McArdle, a Mount Washington resident, also cast his eyes on the newly opened Liberty Tunnels and lobbied for a road that would connect to them. The route proved challenging and would not be completed until 1938 and the road was renamed for him after his death in 1940.
Liberty Bridge Construction 1927.
Liberty Bridge Construction Frederick Law Olmsted's proposed plan for a "high" tunnel and steeper bridge combination that would have exited on the upper backside of Mt. Washington.
Liberty Bridge Construction 1927.
Liberty Bridge Construction 1927.
Liberty Bridge Construction 1927.
Liberty Bridge Construction Deck construction, 1927.
Liberty Bridge Construction Northern approach along Shingiss Street, 1927.
Liberty Bridge Construction Northern approach retaining wall, 1927.
Liberty Bridge Construction Northern approach retaining wall construction, 1927.
Liberty Bridge Construction Northern approach retaining wall construction, 1927.
Liberty Bridge Construction Grand opening ceremonies, 1928.
Liberty Bridge Construction Postcard.
Liberty Bridge 1928.
Liberty Bridge 1931.
Liberty Bridge Construction 1933.
Liberty Bridge 1933.
Liberty Bridge 1931.
Liberty Bridge Construction Northern approach ramps.
Liberty Bridge Construction Rush hour, 1930s.
Liberty Bridge 1962. The northern end of the bridge’s Boulevard of the Allies approach ramp from Grant Street is notable for twin Doric columns topped by American eagles at the top. The granite columns are carved with more patriotic symbols and a dedication statement that reads: “To commemorate the deeds of valor and sacrifice of those who contributed to the successful termination of the World War and to the abiding hope of an enduring peace this boulevard is dedicated.”
The Department of Public Works took up the challenge of designing the bridge. Allegheny County bridge engineer George S. Richardson, a 28-year-old draftsman at the time, is credited with doing most of the design work. Richardson would become known for designing many of the region’s bridges during his career, including the McKee’s Rocks, Homestead High Level, Westinghouse Memorial, West End, Fort Pitt and Fort Duquesne.
While the southern bridge approach was evident, the complicated northern approach required greater scrutiny. Integrating the bridge with existing city streets required an 80 foot deep cut through the bluff along Shingiss Street with the remaining earth and shale held back by a large, sloping reinforced concrete retaining wall. The wall is between 18” and 36” thick and remains to this day, protecting the Crosstown Boulevard below it and supporting Duquesne University above it.
Liberty Bridge Construction Grand opening ceremonies, 1928.
A grand opening celebration was held on March 27, 1928. A parade that stretched fives miles long wove its way from Mt. Lebanon all the way to the southern tunnel portals, where speeches were given. The parade route and bridge were festooned with flags and bunting. It was the largest automobile procession in Pittsburgh history, which proved symbolic as it effectively marked the end of the streetcar’s prominence.
With the easy passage to downtown through the Liberty Tunnels and across the Liberty Bridge complete, development in the South Hills exploded. What had previously been sparsely settled neighborhoods clustered around trolley stops dramatically changed into an extensive patchwork of some of Pittsburgh’s most populated suburbs as housing developments stretched to Allegheny County’s southern border and beyond.
Liberty Bridge At the time it was completed, the 2,633-foot Liberty Bridge was the longest, highest and most expensive bridge in Allegheny County. It has 16 total spans, with two main cantilevers and trusses to leap over the former rail yards on the southern bank of the Monongahela River and city streets on the northern approaches, carrying about 55,000 vehicles daily.
Liberty Bridge At the time it was completed, the 2,633-foot Liberty Bridge was the longest, highest and most expensive bridge in Allegheny County. It has 16 total spans, with two main cantilevers and trusses to leap over the former rail yards on the southern bank of the Monongahela River and city streets on the northern approaches, carrying about 55,000 vehicles daily.
Liberty Bridge At the time it was completed, the 2,633-foot Liberty Bridge was the longest, highest and most expensive bridge in Allegheny County. It has 16 total spans, with two main cantilevers and trusses to leap over the former rail yards on the southern bank of the Monongahela River and city streets on the northern approaches, carrying about 55,000 vehicles daily.
Liberty Bridge At the time it was completed, the 2,633-foot Liberty Bridge was the longest, highest and most expensive bridge in Allegheny County. It has 16 total spans, with two main cantilevers and trusses to leap over the former rail yards on the southern bank of the Monongahela River and city streets on the northern approaches, carrying about 55,000 vehicles daily.
Liberty Bridge At the time it was completed, the 2,633-foot Liberty Bridge was the longest, highest and most expensive bridge in Allegheny County. It has 16 total spans, with two main cantilevers and trusses to leap over the former rail yards on the southern bank of the Monongahela River and city streets on the northern approaches, carrying about 55,000 vehicles daily.
Liberty Bridge At the time it was completed, the 2,633-foot Liberty Bridge was the longest, highest and most expensive bridge in Allegheny County. It has 16 total spans, with two main cantilevers and trusses to leap over the former rail yards on the southern bank of the Monongahela River and city streets on the northern approaches, carrying about 55,000 vehicles daily.
Liberty Bridge At the time it was completed, the 2,633-foot Liberty Bridge was the longest, highest and most expensive bridge in Allegheny County. It has 16 total spans, with two main cantilevers and trusses to leap over the former rail yards on the southern bank of the Monongahela River and city streets on the northern approaches, carrying about 55,000 vehicles daily.
Liberty Bridge At the time it was completed, the 2,633-foot Liberty Bridge was the longest, highest and most expensive bridge in Allegheny County. It has 16 total spans, with two main cantilevers and trusses to leap over the former rail yards on the southern bank of the Monongahela River and city streets on the northern approaches, carrying about 55,000 vehicles daily.
Liberty Bridge At the time it was completed, the 2,633-foot Liberty Bridge was the longest, highest and most expensive bridge in Allegheny County. It has 16 total spans, with two main cantilevers and trusses to leap over the former rail yards on the southern bank of the Monongahela River and city streets on the northern approaches, carrying about 55,000 vehicles daily.
Liberty Bridge At the time it was completed, the 2,633-foot Liberty Bridge was the longest, highest and most expensive bridge in Allegheny County. It has 16 total spans, with two main cantilevers and trusses to leap over the former rail yards on the southern bank of the Monongahela River and city streets on the northern approaches, carrying about 55,000 vehicles daily.
Liberty Bridge At the time it was completed, the 2,633-foot Liberty Bridge was the longest, highest and most expensive bridge in Allegheny County. It has 16 total spans, with two main cantilevers and trusses to leap over the former rail yards on the southern bank of the Monongahela River and city streets on the northern approaches, carrying about 55,000 vehicles daily.
Liberty Bridge At the time it was completed, the 2,633-foot Liberty Bridge was the longest, highest and most expensive bridge in Allegheny County. It has 16 total spans, with two main cantilevers and trusses to leap over the former rail yards on the southern bank of the Monongahela River and city streets on the northern approaches, carrying about 55,000 vehicles daily.
Liberty Bridge At the time it was completed, the 2,633-foot Liberty Bridge was the longest, highest and most expensive bridge in Allegheny County. It has 16 total spans, with two main cantilevers and trusses to leap over the former rail yards on the southern bank of the Monongahela River and city streets on the northern approaches, carrying about 55,000 vehicles daily.
Liberty Bridge At the time it was completed, the 2,633-foot Liberty Bridge was the longest, highest and most expensive bridge in Allegheny County. It has 16 total spans, with two main cantilevers and trusses to leap over the former rail yards on the southern bank of the Monongahela River and city streets on the northern approaches, carrying about 55,000 vehicles daily.
The northern end of the bridge’s Boulevard of the Allies approach ramp from Grant Street is notable for twin Doric columns topped by American eagles at the top. The granite columns are carved with more patriotic symbols and a dedication statement that reads: “To commemorate the deeds of valor and sacrifice of those who contributed to the successful termination of the World War and to the abiding hope of an enduring peace this boulevard is dedicated.”
The original design of the bridge had ornate wrought-iron handrails that flowed into street lights. During a rehabilitation of the bridge in 1983, the bridge was widened from its original 38 feet to 56 feet by cantilevering the deck and those decorative elements were removed. New crash barriers for vehicles were installed and about four million pounds of repair steel was welded onto the bridge. It was also repainted from silver to Aztec gold, matching other Pittsburgh bridges.
Since the Liberty Bridge’s steel cantilevers are not visible to the casual user and its structure is hidden beneath the broad decking, the engineering significance of the span and the bridge’s importance is easily forgotten. The bridge itself is hardly noticed and can easily be thought of as just a brief conduit between the more visible Liberty Tunnels and downtown.
Liberty Bridge construction fire, 2016. On Sept. 2, 2016, errant sparks from a welder ignited plastic ventilation pipes and quickly spread to the large tarps covering the structure. Intense heat from the flames caused a major steel beam to buckle, and engineers later said the bridge was potentially minutes from collapsing.
Liberty Bridge construction fire, 2016. On Sept. 2, 2016, errant sparks from a welder ignited plastic ventilation pipes and quickly spread to the large tarps covering the structure. Intense heat from the flames caused a major steel beam to buckle, and engineers later said the bridge was potentially minutes from collapsing.
Liberty Bridge construction fire, 2016. On Sept. 2, 2016, errant sparks from a welder ignited plastic ventilation pipes and quickly spread to the large tarps covering the structure. Intense heat from the flames caused a major steel beam to buckle, and engineers later said the bridge was potentially minutes from collapsing.
Liberty Bridge construction fire, 2016. On Sept. 2, 2016, errant sparks from a welder ignited plastic ventilation pipes and quickly spread to the large tarps covering the structure. Intense heat from the flames caused a major steel beam to buckle, and engineers later said the bridge was potentially minutes from collapsing.
Liberty Bridge construction fire, 2016. On Sept. 2, 2016, errant sparks from a welder ignited plastic ventilation pipes and quickly spread to the large tarps covering the structure. Intense heat from the flames caused a major steel beam to buckle, and engineers later said the bridge was potentially minutes from collapsing.
Liberty Bridge construction fire, 2016. On Sept. 2, 2016, errant sparks from a welder ignited plastic ventilation pipes and quickly spread to the large tarps covering the structure. Intense heat from the flames caused a major steel beam to buckle, and engineers later said the bridge was potentially minutes from collapsing.
Liberty Bridge construction fire, 2016. On Sept. 2, 2016, errant sparks from a welder ignited plastic ventilation pipes and quickly spread to the large tarps covering the structure. Intense heat from the flames caused a major steel beam to buckle, and engineers later said the bridge was potentially minutes from collapsing.
Liberty Bridge construction fire, 2016. On Sept. 2, 2016, errant sparks from a welder ignited plastic ventilation pipes and quickly spread to the large tarps covering the structure. Intense heat from the flames caused a major steel beam to buckle, and engineers later said the bridge was potentially minutes from collapsing.
Liberty Bridge construction fire, 2016. On Sept. 2, 2016, errant sparks from a welder ignited plastic ventilation pipes and quickly spread to the large tarps covering the structure. Intense heat from the flames caused a major steel beam to buckle, and engineers later said the bridge was potentially minutes from collapsing.
Liberty Bridge construction fire, 2016. On Sept. 2, 2016, errant sparks from a welder ignited plastic ventilation pipes and quickly spread to the large tarps covering the structure. Intense heat from the flames caused a major steel beam to buckle, and engineers later said the bridge was potentially minutes from collapsing.
Liberty Bridge construction fire, 2016. On Sept. 2, 2016, errant sparks from a welder ignited plastic ventilation pipes and quickly spread to the large tarps covering the structure. Intense heat from the flames caused a major steel beam to buckle, and engineers later said the bridge was potentially minutes from collapsing.
Liberty Bridge construction fire, 2016. On Sept. 2, 2016, errant sparks from a welder ignited plastic ventilation pipes and quickly spread to the large tarps covering the structure. Intense heat from the flames caused a major steel beam to buckle, and engineers later said the bridge was potentially minutes from collapsing.
Liberty Bridge construction fire, 2016. On Sept. 2, 2016, errant sparks from a welder ignited plastic ventilation pipes and quickly spread to the large tarps covering the structure. Intense heat from the flames caused a major steel beam to buckle, and engineers later said the bridge was potentially minutes from collapsing.
Liberty Bridge construction fire, 2016. On Sept. 2, 2016, errant sparks from a welder ignited plastic ventilation pipes and quickly spread to the large tarps covering the structure. Intense heat from the flames caused a major steel beam to buckle, and engineers later said the bridge was potentially minutes from collapsing.
In a real-world example of “You don’t know what you have until it’s gone,” Pittsburghers were stunned when a massive fire broke out during bridge reconstruction work on Sept. 2, 2016. Errant sparks from a welder ignited plastic ventilation pipes and quickly spread to the large tarps covering the structure. Huge plumes of acrid smoke filled the sky as people flocked to windows and saw the landmark blazing.
Liberty Bridge construction fire, 2016. On Sept. 2, 2016, errant sparks from a welder ignited plastic ventilation pipes and quickly spread to the large tarps covering the structure. Intense heat from the flames caused a major steel beam to buckle, and engineers later said the bridge was potentially minutes from collapsing.
Intense heat from the flames caused a major steel beam to buckle, and engineers later said the bridge was potentially minutes from collapsing. Fire officials later estimated the fire burned at more than 1,200 degrees.
The bridge was immediately closed to all traffic for the first time on a weekday since it opened. It would remain closed for over three weeks. The city was treated to a reminder of how impressive and important the long taken-for-granted bridge’s structure is, carrying about 55,000 vehicles daily.
After extensive analysis, the bridge was found to be several inches out of position and experts from CMU and Lehigh Universities designed a pair of 26.5-foot braces to stabilize the bridge after jacking it back into its rightful place. The repairs were completed at great expense to the bridge’s contractor, Joseph B. Faye Co., which also had to pay fines of $213,000 every day that the bridge was closed.
The bridge reopened with weight restrictions for a time, before fully reopening after the new braces were in place.